카메라 제품소개

제조사 HIK ROBOT
모델명 MV-CL042-91CM
다운로드

     제품스펙

    4096 P Camera Link Line Scan Camera

     제품상세

    MV-CL042-91CM

    4096 P Camera Link Line Scan Camera

    MV-CL042-91CC.pngMV-CL042-91CC b.png

    Introduction

     

    Key Feature

    • Supports multiple exposure and image acquisition methods with max. line rate of 100 kHz.

    • Applies multiple ISP technologies and supports manual adjustment for Gamma correction, PRNUC correction, LUT,black level, etc.

    • Supports bi-directional I/O wiring for flexible input/output settings.

    • Compact design and flexible installation.

    • Compatible with Camera Link Protocol and GenlCam Standard.


    Available Model

    Mono camera: MV-CL042-91CM


    Dimension

    MV-CL042-91CMCC 终.png

    *The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom. 

    Specifications

    Model Model MV-CL042-91CC
    Type 4096 P Camera Link Line Scan Camera
    Camera Sensor type CMOS
    Pixel Size 7 μm
    Resolution 4096×2
    Image mode Supports 1-line
    Max. Line Rate 40 kHz@ Mono 8 (Base), 50 kHz@ RGB 8 (80-bit), 100 kHz@ Bayer RGBG 8 (Full)
    Configuration mode Base, Medium, Full, 80-bit
    Tap geometry 1X, 1X2, 1X4, 1X8, 1X10
    Tap number 1 Tap, 2 Taps, 4 Taps, 8 Taps, 10 Taps
    Pixel clock 40 MHz, 60 MHz, 70 MHz, 85 MHz
    Dynamic range 65.6 dB
    SNR 40 dB
    Gain Supports 1.0 ×, 1.4 ×, 1.6 ×, 2.4 ×, 3.2 ×
    Exposure time 5 μs to 10 ms
    Exposure mode Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure
    Mono/Color Color
    Pixel format Mono 8, RGB 8, Bayer RGBG 8
    Binning Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4
    Reverse image Supports horizontal reverse image output
    Trigger mode External trigger, internal trigger
    External trigger mode Line trigger, frame trigger, line + frame trigger
    Electrical features Data Interface Camera Link
    Digital I/O 12-pin Hirose connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4).
    Power supply 12 VDC to 24 VDC
    Power consumption Typ. 6.1 W@12 VDC
    Mechanical Lens mount M42*1, optical back focal length: 12 mm (0.5"), applicable to F-mount, C-mount and lens of other types
    via lens adapter
    Dimension 62 mm × 62 mm × 36.9 mm (2.4" × 2.4" × 1.5")
    Weight Approx. 238 g (0.5 lb.)
    Ingress protection IP40 (under proper lens installation and wiring)
    Temperature Working temp.: -20 °C to 55 °C (-4 °F to 131 °F), storage temp.: -30 °C to 80 °C (-22 °F to 176 °F)
    Humidity 5% to 95% RH, non-condensing
    General Client software MVS and frame grabber software meeting with Camera Link Protocol
    Operating system 32/64-bit Windows XP/7/10
    Compatibility Camera Link V1.2, GenICam
    Certification CE, FCC, RoHS, KC


    Download