카메라 제품소개
MV-CL04T-B1FM
제조사 | HIK ROBOT |
---|---|
모델명 | MV-CL04T-B1FM |
다운로드 |
|
제품스펙
제품상세
MV-CL04T-B1FM
4K 5μm,256tdi,XoF
Introduction
Key Feature
Adopts BSI pixel of 5 μm × 5 μm with high-sensitivity.
Supports 256-TDI imaging to enhance photosensitive performance.
Adopts XoF transmission with max. line rate of 200 kHz.
Adopts multiple ISP like Gamma correction, flat field correction, black level offset, etc.
Adopts bi-directional configurable I/O hardware design.
Compact design and flexible installation.
Available Model
MV-CL04T-B1FM
Dimension
*The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Specifications
Model | Product Model | MV-CL04T-B1FM |
Type | 4K 5μm,256tdi,XoF | |
Performance | Sensor type | CMOS |
Pixel size | 5 μm × 5 μm | |
Resolution | 4096 × 256 | |
Image mode | Supports 64-TDI, 128-TDI, 192-TDI, and 256-TDI | |
Min. line rate | 20 kHz | |
Max. line rate | 200 kHz | |
Dynamic range | 63.1 dB | |
SNR | 42.4 dB | |
Gain | Supports 1.0 ×, 2.0 ×, 4.0 × | |
Exposure time | 3 μs to 10 ms | |
Exposure mode | Off/ Once/ Continuous exposure mode under area scan mode | |
Mono/color | Mono | |
Pixel format | Mono 8/10/12 | |
Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 | |
Reverse image | Supports horizontal reverse image output | |
Trigger mode | External trigger, internal trigger | |
External trigger mode | Line trigger, frame trigger, line + frame trigger | |
Electrical feature | Data interface | LC fiber connector |
Digital I/O | 12-pin P10 connector provides power and I/O: Configurable input/output × 4 (Line 0/1/3/4) and single-ended/differential is supported. | |
Power supply | 12 VDC to 24 VDC | |
Power consumption | Typ. 8.4 W@24 VDC | |
Mechanical | Lens mount | M42 *1, flange focal length 12 mm (0.5"), applicable to C/F-mount via lens adapter |
Dimension | 102 mm × 62 mm × 71.4 mm (4.0" × 2.4" × 2.8") | |
Weight | Approx. 417 g (1.0 lb.) | |
Ingress protection | IP40 (under proper lens installation and wiring) | |
Temperature | Working temperature: -20 °C to 55 °C (-4 °F to 131 °F) Storage temperature: -30 °C to 80 °C (-22 °F to 176 °F) | |
Humidity | 5% to 90% RH, non-condensing | |
General | Client software | MVS |
Operating system | 32/64-bit Windows XP/7/10, 64-bit Windows 11 | |
Compatibility | Self-developed protocol, GenlCam | |
Certification | CE, RoHS, KC |
Download